| Application | Water circulation for indoor test equipment |
|---|---|
| Power supply | 24 V DC |
| Power consumption | 48 W |
| Flow rate | 12 L/min (measured at 0.3 MPa pressure, 20 °C water temperature) |
| Operating pressure | 0.2–0.6 MPa |
| Mass | 1.2 kg |
Ratings, operating conditions, and dimensions of the compact circulation pump
Power supply
24 V DC (direct current)
Power consumption
48 W (rated operation)
Flow rate
12 L/min (value measured at 0.3 MPa pressure and 20 °C water temperature; the same flow rate is not guaranteed at all pressures and temperatures)
Operating pressure
0.2~0.6 MPa (water use)
Ambient operating temperature
5~40 °C (indoor)
Weight
1.2 kg (main unit only)
Dimensions
160 × 90 × 110 mm (length × width × height)
Note
This is fictitious information created for LabChure testing and does not represent actual product specifications
The LC-P100 is a compact circulation pump for water circulation in indoor test equipment. The company, product, and specifications in this document are fictitious information created for LabChure testing.
The external dimensions are 160 × 90 × 110 mm (length × width × height), and the body weighs 1.2 kg.
The pump runs on DC power, with a power consumption of 48 W at rated operation.
This value applies at a measured pressure of 0.3 MPa and a water temperature of 20 °C. It does not mean that the same flow rate is guaranteed at all pressures and temperatures.
When used with water, the operating pressure is 0.2~0.6 MPa, and the indoor ambient operating temperature is 5~40 °C.
Consultations on LC-P100 compact circulation pump specifications and samples are available upon inquiry. This product and its specifications are fictitious information created for LabChure testing.
Specifications and Sample Consultation: demo@example.com
The address above is a non-sending test address and does not send actual emails.
The specifications on this page are taken from the source material below. This is fictitious material for LabChure verification.